Hvordan man bliver brugt til down tube shifters

Hvordan man bliver brugt til down tube shifters

Down tube shifters er shifters monteret på den nedre røret på en cykel, der er skubbet eller trukket for at skifte gear. De er kendt for deres pålidelighed, nøjagtighed og lette justering. Mange turcyklister, og endda nogle cyklocross-ryttere, har taget til down tube shifter setup, fordi shifters er ude af vejen for tasker og tilbehør og kræver ikke meget opmærksomhed for at fortsætte med at fungere korrekt. Desværre kan det være en vanskelig proces at vænne sig til nedre rørskiftere, da de kræver, at håndtagene afbrydes intermitterende.

Find et stort område, hvor du kan øve skift og manøvrer på din cykel. En stor parkeringsplads eller multi-use sti er ideel.

Løft cykelets baghjul ud af jorden, eller sæt cyklen på hovedet på sædet og styret. Mens du drejer cyklens pedaler med uret, trækker du højre håndtaget i sin øverste position og skub den venstre til den nederste position. Du involverer begge shifters i "en" positionen.

Sæt over cyklen og begynde at køre i et anstændigt tempo i en lige linje. Går for langsomt vil resultere i hoppede, uregelmæssige skift, så arbejde op en god mængde fart.

Tag din højre hånd ud af styret, når du føler at du pedalerer for hurtigt for at holde trit med cyklens hastighed. I en hurtig bevægelse skal du holde cyklen stabil med din venstre hånd og skubbe den højre nedre rørhåndtag ned med et enkelt klik, og sæt hånden tilbage på stængerne. Cyklen vil skifte til et lidt højere gear.

Bremse let, når du ønsker at sænke eller stoppe. Når du sænker med nedrørskiftere, skal du tage din højre hånd ud af styret og bremse blødt med venstre. Træk op til højre skifte et klik ad gangen, indtil du når et gear, der passer til den langsommere hastighed, som du er på vej til. Sæt din højre hånd tilbage på styret og fortsæt med at køre.
Hvordan man bliver brugt til down tube shifters

FAQ - 💬

❓ Are down tube shifters good?

👉 In addition, downtube shifters are excellent for travel. Packing up your bike for a tour is significantly easier than brifters and bar-ends since there are fewer cables and housing lengths to worry about while positioning the handlebars.

❓ How do you use down tube shifters?

👉 Lever or Downtube Shifters The right one shifts the rear derailleur and the left, the front. Pulling the left, or front, lever backwards tightens the cable and pushes the chain up to a bigger front chainring. To shift down, simply push the lever in the opposite direction.

❓ Can you change downtube shifters?

👉 Condensed answer: It's possible to convert a bike with downtube shifters to STI brake-shifters, but the needed parts could make the conversion too expensive.

❓ Are friction shifters good?

👉 Other advantages: With friction shifters the rider can pull the derailleur to the exact right position. In the beginning this might sounds difficult but after a few days on the bicycle it is very easy, and you start to appreciate that you can avoid chain rub on your front derailleur. They are easy to adjust.

❓ Will friction shifters work with any derailleur?

👉 Any derailleur will work with a friction shifter.

❓ What are STI levers?

👉 Dual Control or Shimano Total Integration (STI) is Shimano's name for the integrated brake and gear shifter lever. The Shimano shifter system works by moving the whole brake lever to change gear in one direction, and using a smaller integrated lever inside the main brake lever to change in the other direction.

❓ How do you use old bike shifters?

👉 0:361:44Cycling Expert Advice: Road Bike Shifting

❓ Can you upgrade bike shifters?

👉 Yes, you can upgrade your bike. A switch from mechanical to electronic bike shifters can involve as little as swapping four parts, says Shimano's Road Brand Manager Nick Legan: the Di2 shifters and derailleurs (and adding the wiring harness and battery). But that's only for current 11-speed and 12-speed drivetrains.

❓ What are STI shifters?

👉 Shimano Total Integration (STI) is a gearshift system designed by Shimano for racing bicycles. It combines the braking and gear shifting controls into the same component. This allows shifting gears without having to remove a hand from the bars, unlike previous down tube shifting systems.

❓ Do friction shifters click?

👉 Friction shifters don't have ratchets but move linearly without clicking. In the two systems, a rider uses levers to regulate tension in the derailleur cable, and then the cable pulls the derailleur to shift gears.

❓ Can you use any shifter with any derailleur?

👉 No, different maker or different model with different number of "speed" shifters have different pull ratio (i.e. the length of cable pulled by a single shift). Usually it's safe to use different model with same number of gears from the same maker.

Del:
Kommentarer